EasyManua.ls Logo

Husky G2801B-US - Drawer Removal and Replacement; Door Removal and Installation

Husky G2801B-US
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pull the drawer out until it is extended to the maximum. There are two black release levers: one on each side of the drawer.
Pull one up while you push the other one down simultaneously. At the same time, pull the drawer out of the drawer slides.
Pull up
(on one side of the drawer)
Push down
(on the other side of the drawer)
Drawer Removal
Extend the drawer slides from the cabinet. Insert the brackets on each side of the drawer into the slots in the cabinet slides,
being careful that they are properly positioned. Once properly inserted, completely close the drawer to set the slides in their
proper positions.
Drawer Replacement
Door Replacement
DOOR REMOVAL
Pull the upper locking tab of the door outward until the door pin is unlocked by it.
Take out the door pin from the door.
Lift up the door and take out the door from the cabinet.
Pull the bottom locking tab of the door outward and take out the door pin and rubber ring.
1 2
3
4
7
WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.

Related product manuals