Husky H250SFA - Accessories; Troubleshooting

13 – English
ACCESSORIES
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments or
accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended
can result in serious personal injury.
To order parts and maintenance kits, call 1-866-340-3912.
OilandWrenchKit............................................................................................................................................079065001262
OverhaulKit ......................................................................................................................................................079065001263
DriverMaintenanceKit .....................................................................................................................................079065001264
DriverAssemblyKit ..........................................................................................................................................079065001265
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Air leak near the top of the tool or
in the trigger area
Loose screws
Worn or damaged O-rings or seals
Tighten screws
InstallOverhaulKit
Air leak near the bottom of the
tool
Loose screws
Worn or damaged O-rings or bumper
Tighten screws
InstallOverhaulKit
Tool does nothing or operates
sluggishly
Inadequate air supply
Inadequate lubrication
Worn or damaged O-rings or bumper
Verify adequate air supply
Lubricate tool
InstallOverhaulKit
Tool jams frequently Incorrect fasteners
Damaged fasteners
Loose magazine
Dirty magazine
Worn or damaged driver
Verify that fasteners are the correct size
Replace fasteners
Tighten screws
Clean magazine
InstallDriverMaintenanceKit