16
Tank has sufficient pressure.
No electrical power.
Blown shop/home fuse
Tripped shop/home breaker
Thermal overload open
Loss of power or overheating
Pressure switch is bad
Compressor will turn on when tank
pressure drops to cut-in pressure
Check to be sure unit is plugged in.
Replace shop/home fuse.
Reset shop/home breaker, determine
why problem happened.
Motor will restart when cool
Check for proper use of extension cord
Replace pressure switch
Tank has sufficient pressure.
No electrical power.
Blown shop/house fuse.
Tripped shop/home breaker.
Thermal overload open.
Loss of power or overheating.
Pressure switch is bad.
Compressor will turn on when tank
pressure drops to cut-in pressure.
Check to be sure unit is plugged in.
Replace shop/house fuse.
Reset shop/home breaker, determine
why problem happened.
Motor will restart when cool.
Check for proper use of extension cord.
Replace pressure switch.
To Next Page
Loading...
