Husky H4DETSD - User Manual

Need help?

Do you have a question about the Husky H4DETSD and is the answer not in the manual?

Summary

Digital Torque Screwdriver Operations

Powering On and Mode Selection

Steps to power on the device and select between PEAK and TRACK operational modes.

Unit and Target Torque Setting

Configuration for torque units (Lb.in, cN.m, Kg.cm) and setting the target torque value.

Applying Torque in Peak Mode

Guidance on using the screwdriver in Peak mode, including feedback mechanisms.

Applying Torque in Track Mode

Explanation of operation and feedback in Track mode.

Device Functions and Charging

Controls for backlight, power off, and procedures for charging the screwdriver's battery.

Maintenance and Care Guidelines

Summary

Digital Torque Screwdriver Operations

Powering On and Mode Selection

Steps to power on the device and select between PEAK and TRACK operational modes.

Unit and Target Torque Setting

Configuration for torque units (Lb.in, cN.m, Kg.cm) and setting the target torque value.

Applying Torque in Peak Mode

Guidance on using the screwdriver in Peak mode, including feedback mechanisms.

Applying Torque in Track Mode

Explanation of operation and feedback in Track mode.

Device Functions and Charging

Controls for backlight, power off, and procedures for charging the screwdriver's battery.

Maintenance and Care Guidelines

The Husky Digital Torque Screwdriver (Item: 1007866725, Model: H4DETSD) is a precision instrument designed for tightening small fasteners to a desired torque. It is not intended to be used as a regular screwdriver.

Function Description:

This digital torque screwdriver allows users to set a target torque value and provides visual and audible feedback when the desired torque is reached or exceeded. It operates in two primary modes: Peak Mode and Track Mode. In Peak Mode, the displayed torque value increases with the applied force and remains on the screen after the torque is released, resetting to zero for the next application. In Track Mode, the display shows the current applied torque value, which drops to zero when the torque is released. Both modes feature audible and visual alarms to indicate torque status.

Important Technical Specifications:

Accuracy:
- +/- 3% from 20% to 100% of capacity in clockwise direction.
- +/- 5% from 20% to 100% of capacity in counter-clockwise direction.
Bit Compatibility: Accepts 1/4 inch insert bits.
Power Source: Built-in lithium battery.
Charging: Uses a special charging adapter (Input AC 110-220V/50Hz; Output DC 5V).
Units of Measure: Supports Lb.in, cN.m, and Kg.cm.

Usage Features:

Power On/Off: Press and hold the power key to turn on. The device automatically shuts down after 3 minutes of inactivity or can be manually shut down by pressing and holding the power key for 3 seconds.
Mode Setting: Press the "M" key to enter setting mode. Use the up/down keys to switch between "PEAK" and "TRACK" modes.
Unit Setting: After confirming the mode, press the "M" key again to enter unit setting. Use the up/down keys to cycle through Lb.in, cN.m, and Kg.cm.
Target Torque Value Setting: After confirming the unit, press the "M" key to enter target torque value setting. Use the up/down keys to adjust the value, holding them down for faster adjustment.
Torque Application Feedback:
- When the applied torque reaches 96% of the set value, a green light turns on, and the buzzer beeps.
- If the applied torque exceeds 104% of the set value, the green light turns off, a red light turns on, and the buzzer remains on until the torque is released.
Backlight: The backlight can be turned on or off using the up and down keys, respectively.
Charging Status: The battery icon flashes during charging and becomes solid when fully charged. The screen turns off automatically during charging, but pressing the power key will display the charging status.
Quick Release Collar: Facilitates easy changing of 1/4 inch insert bits.
Buttons: Features dedicated buttons for Up, Down, and Mode selection.
LED Lights: Provides visual indicators for various statuses, including mode and torque feedback.
Charging Port: Located on the handle for convenient charging.

Maintenance Features:

Even Force Application: Ensure force is applied evenly to the screwdriver to maintain accuracy.
Overload Prevention: It is crucial to stop applying force immediately when the desired torque is indicated by the alarms. Overloading can negatively impact the accuracy of the device and should never exceed the maximum value for the driver.
Charging Practices: Unplug the device once charging is complete to ensure proper battery care.
Manual Clear: In Peak Mode, the displayed result can be manually cleared by pressing the power key.

Husky H4DETSD Specifications

General

Brand	Husky
Model	H4DETSD
Category	Power Screwdriver
Language	English