Husky H63MWC11FT - Assembly; Attaching the Cabinet Handle; Attaching the Bottle Opener; Attaching the Storage Hook

D
AA
A
B
A
B
AA
Assembly
1
Attaching the cabinet handle
Position the cabinet handle (B) over the holes on the
cabinet (A).
Attach with the bolts (AA) and tighten with supplied
hex key (BB).
NOTE:
The holes in the cabinet are tapped and do not
require nuts.
□
□
Repeat this process at back side of cabinet (A). □
Attach with the bolts (AA) and tighten with supplied hex key (BB).
CAUTION:
Two people are recommended for assembly.
Attaching the storage hook
3
□ Position the storage hook (C) over the holes on the cabinet (A).
□
6
Attaching the bottle opener
CAUTION: Do not over tighten the bolts.
Attach with the bolts (AA) and tighten with supplied
hex key (BB).
2
□ Position the bottle opener (D) over the holes on the
cabinet (A).
□
C
C
A
A
AA
AA
NOTE:
Caster hubcap may be different than
shown in diagram.
NOTE:
Caster hubcap may be different than
shown in diagram.