Need help?Do you have a question about the Husqvarna 13 AWD and is the answer not in the manual?
Guidelines for safely travelling with the machine on public roads and transporting it on other vehicles.
Defines the machine's intended purpose and emphasizes the importance of following safety procedures and regulations.
Information on obtaining service from authorized dealers and locating the machine's serial number for parts.
Explains the meaning of various symbols used on the machine and in the manual for safe operation.
Covers safe operation practices, operator responsibilities, and general precautions for machine use.
Provides essential guidelines and precautions for safely operating the machine on inclines and slopes to prevent overturning.
Details safety measures related to children near the machine and safe maintenance procedures.
Outlines safety precautions and procedures for transporting the machine securely to prevent accidents.
Identifies and explains the function of all control levers, buttons, and switches on the machine's operator interface.
Details controls like throttle, clutch, and brake pedals for Rider 11 and 11C models.
Explains controls such as speed limiter and parking brake for Rider 13C, 13 AWD, and 15C models.
Describes the cutting unit, lift lever, and height adjustment mechanism for optimal mowing.
Covers seat adjustment for operator comfort and the correct, safe procedure for fuelling the machine.
Guides the user through pre-operation checks and the process of starting the engine safely.
Provides instructions on how to start the engine using jumper cables if the battery is weak.
Explains how to operate the machine for forward/reverse movement and how to safely stop the engine.
Offers advice for effective mowing and specific instructions for starting on hills with manual gearbox models.
Lists required maintenance tasks and their recommended intervals, along with cleaning procedures to maintain the machine.
Provides instructions for removing machine hoods for access and inspecting the silencer for completeness and security.
Details procedures for checking and adjusting steering wires and brakes on various Rider models.
Guides on adjusting throttle wire, replacing fuel filter, and replacing air filter for optimal engine performance.
Outlines how to inspect the safety system, check tyre pressures, and ensure the cooling air intake is clear.
Explains how to adjust cutting unit ground pressure and parallelism for optimal mowing results.
Guides on placing the cutting unit in a service position for easier maintenance and restoring it afterwards.
Provides instructions for checking and changing the engine oil to ensure proper lubrication and engine health.
Details checking transmission oil and lubricating the belt tensioner for smooth operation of the drive train.
Covers lubrication of front wheel bearings and general lubrication points for overall machine longevity.
Outlines steps for preparing the machine for storage, including fuel stabilization and using a protective cover.
Discusses the importance of annual servicing and provides guidance on ordering genuine spare parts.
Lists detailed dimensions, engine power, displacement, fuel, oil, and starting methods for various models.
Provides specifications for the electrical system, battery, spark plug, main fuse, and transmission components.
Declares that the Husqvarna Rider models comply with relevant EU directives concerning machinery, EMC, and noise emissions.
Details the checklist of tasks performed during pre-delivery service to ensure the machine is ready for use.
Outlines initial service requirements, customer information, and proof of sale procedures for new owners.
General| Brand | Husqvarna |
|---|---|
| Model | 13 AWD |
| Category | Lawn Mower |
| Language | English |
To Next Page