EasyManua.ls Logo

Husqvarna 155, 155 AWD User Manual

Husqvarna 155, 155 AWD
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator´s manual
Rider 155
Rider 155 AWD
Please read these instructions carefully and make sure
you understand them before using the machine.
English

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Husqvarna 155, 155 AWD and is the answer not in the manual?

Husqvarna 155, 155 AWD Specifications

General IconGeneral
BrandHusqvarna
Model155, 155 AWD
CategoryLawn Mower
LanguageEnglish

Summary

Introduction and General Information

General Information

Provides basic definitions and context for the operator's manual.

Operating the Machine Safely

Covers fundamental safe operation practices for the ride-on mower.

Driving and Transport Procedures

Details on how to safely drive and transport the machine on public roads.

Towing Guidelines

Instructions and warnings related to towing the machine or using it to tow.

Service and Support

Good Service and Support

Information on obtaining the best support and service for Husqvarna products.

Machine Identification

Details on locating and using the machine's model and serial numbers.

Safety Rules for USA

General Operation Safety

Essential safety rules for operating the ride-on mower.

Slope Operation Safety

Specific safety precautions for operating on slopes.

Child Safety Precautions

Safety measures to prevent accidents involving children.

Gasoline and Service Safety

Safe Handling of Gasoline

Crucial safety guidelines for handling flammable gasoline.

Service Safety Precautions

Safety rules related to machine maintenance and servicing.

Additional Safety Guidelines

Road Travel and Towing Safety

Safety aspects for transporting the machine on roads and towing.

Operator and Machine Safety

Covers intended use, operator responsibility, and safe operation practices.

Symbols and Decals Explanation

Detailed Safety Instructions

Personal Safety Equipment

Recommendations for personal protective equipment (PPE) during operation.

Slope Operation Precautions

Detailed safety measures for operating on inclined surfaces.

Children Safety Precautions

Maintenance and Fuel Safety

Maintenance Safety Guidelines

Safety rules pertaining to machine maintenance procedures.

Gasoline Handling Safety

Reinforces safe practices for handling gasoline.

General Maintenance Safety

Transport Safety

Customer Responsibilities

Controls Overview

Control Locations

Diagram and identification of all controls on the machine.

Key Machine Controls

Throttle, Choke, and Speed Limiter

Explanation of the throttle lever and speed limiter pedals.

Parking Brake Operation

Instructions on how to engage and disengage the parking brake.

Cutting Unit Controls

Cutting Unit Controls

Details on the cutting unit lift lever and related functions.

Height Adjustment and Refueling

Cutting Height Adjustment

How to adjust the cutting height for different mowing conditions.

Refueling Procedures

Instructions and warnings for safely refueling the machine.

Operation Procedures

Before Starting Checks

Pre-operation checks and reading safety instructions.

Starting the Engine

Step-by-step guide for starting the engine.

Engine Starting Procedures

Starting with a Weak Battery

Running and Driving

Mowing Tips

Hill Operation and Engine Stopping

Operating on Hills

Safety and operational advice for mowing on slopes.

Stopping the Engine

Procedure for safely shutting down the engine.

Release Lever and Axle Engagement

Maintenance Schedule

Cleaning and Washing

Instructions for cleaning and washing the machine after use.

Machine Hoods and Steering

Dismantling Machine Hoods

Steps for removing the engine and front hoods for access.

Steering Wire Adjustment

Procedure for checking and adjusting the steering control wires.

Brake and Throttle Adjustments

Parking Brake Adjustment

Instructions for adjusting the parking brake mechanism.

Throttle Wire Adjustment

Procedure for adjusting the throttle control cable.

Filter Replacements and Muffler

Fuel Filter Replacement

Guide for replacing the fuel filter.

Air Filter Replacement

Instructions for replacing the air filter.

Muffler Inspection

How to inspect the muffler for completeness and security.

Battery and Ignition System

Battery Acid Level Check

Procedure for checking the battery acid level.

Ignition System Maintenance

Maintenance procedure for the spark plug.

Safety System and Checks

Safety System Checks

How to verify the functionality of the machine's safety systems.

Fuse and Tire Pressure Checks

Checking the main fuse and tire pressure.

Cooling Air Intake Check

Ensuring the engine's cooling air intake is clear.

Cutting Unit Installation

Fitting the Cutting Unit

Step-by-step guide for attaching the cutting unit to the mower.

Cutting Unit Adjustments

Cutting Unit Ground Pressure

Checking and adjusting the cutting unit's ground pressure.

Cutting Unit Parallelism

Checking the parallelism of the cutting unit.

Cutting Unit Maintenance

Adjusting Cutting Unit Parallelism

Detailed procedure for adjusting the cutting unit's parallelism.

Removing the Cutting Unit

Instructions for safely removing the cutting unit.

Cutting Unit Belt and Service Position

Cutting Unit Belt Replacement

Procedure for replacing the V-belt on the cutting unit.

Cutting Unit Service Position

How to place the cutting unit in service position for easy access.

Checking and BioClip Plug

Checking and Sharpening Blades

Importance of blade condition and checking attachment screws.

BioClip Plug Removal

Procedure for removing the BioClip plug from the Combi unit.

Lubrication Procedures

Engine Oil Level and Change

How to check and change the engine oil.

Oil Filter and Transmission

Oil Filter and Transmission Oil

Procedures for changing the oil filter and checking transmission oil.

Lubrication Details

Belt Adjuster and General Lubrication

Lubrication points for the belt adjuster and general lubrication advice.

Troubleshooting Schedule

Storage Procedures

Winter Storage

Guidelines for preparing the machine for winter storage.

Service Recommendations

Advice on annual servicing for optimal machine performance.

Technical Data

Service Journal

Pre-delivery Service

Checklist for pre-delivery inspection and setup.

Initial Service

Required service after the first 5 hours of operation.

Related product manuals