Need help?Do you have a question about the Husqvarna Rider 13 AWD and is the answer not in the manual?
General| Brand | Husqvarna |
|---|---|
| Model | Rider 13 AWD |
| Category | Lawn Mower |
| Language | English |
General guidance for manual users and workshop requirements.
Specific hazards and precautions related to the rider's operation.
Precautions to prevent sparking when working with the battery and starter motor.
Lists and illustrates specialized tools required for rider maintenance and repair.
Instructions for safe use and maintenance of the laser tachometer for speed measurement.
Step-by-step guide to measuring engine speed using the laser tachometer.
How to access and interpret stored speed measurements from the tachometer.
Procedure for replacing batteries in the laser tachometer.
Guidelines for cleaning and maintaining the laser tachometer.
Technical specifications for rider dimensions and weight across different models.
Details on tyre dimensions and air pressure requirements.
Specifications for engine manufacturer, model, power, and oil types.
Information on front and rear drive axle manufacturers and oil specifications.
Specifications for the electrical system, including battery, fuses, and spark plugs.
Specific torque values for various components during assembly and repair.
Specifications for different cutting unit models (Combi 94, 103, 112).
Checks for parallelism, cutting height, and belt distances.
Specifications for brake cable and hydrostatic pedal play.
Step-by-step procedure for pre-delivery inspection and preparation of the rider.
Initial service tasks to be performed after the first few hours of operation.
Service tasks required after the first 50 hours of operation.
Maintenance schedule for 25-hour intervals.
Maintenance schedule for 50-hour intervals.
Maintenance schedule for 100 and 200-hour intervals.
Comprehensive service tasks required at 300-hour intervals.
Seasonal maintenance tasks to be performed annually.
Overview of maintenance tasks, their frequency, and location in the manual.
Guidelines for dealers on how to deliver the machine and inform the customer.
Instructions on how to unpack the machine and handle its packaging.
Detailed instructions for filling, charging, and fitting the battery.
Procedure for fitting the steering wheel to the steering column.
Instructions for fitting the towing eye and counterweight.
Step-by-step guide to checking the engine oil level for different engine types.
Procedure for checking and topping up the hydraulic oil level.
Instructions for fitting wheels and checking tyre pressure.
Information on fitting front and rear skid guards.
Steps to check and adjust the cutting unit after setting tyre pressures.
Procedure for initial test running of the engine and machine.
Checks to perform before starting the engine and safety interlocks.
Specifications and checks for engine speed adjustment.
Instructions for inspecting the muffler's secure fit and tightening torque.
Final checks, bleeding the hydraulic system, and cleaning the machine.
Procedures for completing paperwork, customer registers, and service journals.
Overview of the Husqvarna Rider series, features, and models covered.
Location and identification of machine and engine serial numbers for ordering parts.
Details on the types of engines used and where to find specific repair manuals.
Explanation of the articulated steering system and its benefits.
Explanation of the hydrostatic transmission, AWD, and how the drive system works.
Description of the front-mounted cutting units and BioClip functionality.
Step-by-step guide to removing the Briggs & Stratton engine from the machine.
Instructions for installing the Briggs & Stratton engine, including torque specifications.
Step-by-step guide to removing the Kohler engine from the machine.
Instructions for installing the Kohler engine, including torque and alignment details.
Step-by-step guide to removing the Kawasaki engine from the machine.
Instructions for installing the Kawasaki engine, including torque and alignment.
Procedure for checking the engine oil level for Briggs & Stratton engines.
Steps for changing the engine oil for Briggs & Stratton engines.
Procedure for checking the engine oil level for Kohler engines.
Steps for changing the engine oil for Kohler engines.
Procedure for checking the engine oil level for Kawasaki engines.
Instructions for removing and fitting the fuel tank.
Steps for changing the engine oil for Kawasaki engines.
Procedure for checking and adjusting the tension of the steering cables.
Detailed steps for replacing the steering cables.
Instructions for removing and fitting the steering cable pulley.
How to adjust the parking brake for proper function.
Procedure for adjusting the hydrostatic transmission cable.
How to check and adjust the throttle cable on Kawasaki engines.
Procedure for checking and adjusting throttle and choke cables for Kohler engines.
How to adjust the throttle cable for Briggs & Stratton engines.
How to check and adjust the choke cable for Kawasaki engines.
Steps for replacing the articulated steering bearings.
Procedure for removing the pendulum shaft.
Instructions for replacing bushings in the rear frame.
Steps for fitting the pendulum shaft.
Removal procedure for the front axle.
Steps for assembling the front axle.
Removal procedure for the rear axle.
Steps for assembling the rear axle.
How to synchronize the front and rear wheel drives for proper cornering.
Procedure for replacing the seal on the ingoing shaft of the hydrostatic transmission.
Procedure for replacing the seal on the outgoing shaft of the hydrostatic transmission.
Step-by-step guide to removing the hydrostatic transmission cable.
Instructions for fitting the new hydrostatic transmission cable.
Procedure for bleeding air from the drive system after repairs.
First method for adjusting the transmission neutral position.
Second method for adjusting the transmission neutral position.
Recommendations and procedures for changing transmission oil.
Instructions for draining and filling hydrostatic transmissions on front and rear axles.
Procedure for replacing the hydrostatic transmission filter.
How to adjust the lever housing settings for cutting unit and belt adjuster.
Step-by-step guide for removing and fitting the hydraulic pump's drive belt.
Instructions for removing and fitting the centre belt, including adjuster settings.
Procedure for removing and fitting the front belt, especially for snow blade attachment.
Steps for removing the equipment frame.
Instructions for assembling the equipment frame.
Procedure for fitting the cutting unit to the rider.
Steps for removing the cutting unit.
Explanation of the service position for the cutting unit.
Detailed steps to place the cutting unit in its service position.
Procedures to return the cutting unit from service position.
How to adjust parallelism and cutting height for the cutting unit.
Procedure for adjusting the cutting unit's parallelism.
Steps to adjust the cutting height of the unit.
How to adjust the overall cutting height range.
Procedure to check and adjust the ground pressure of the cutting unit.
Steps for replacing the V-belt on Combi cutting units.
Procedure to remove blades and bearings for Combi 112 cutting units.
Procedure to remove blades and bearings for Combi 94 and 103 cutting units.
Instructions for sharpening and balancing mower blades.
How to remove the BioClip plug to change cutting unit function.
Overview of the rider's electrical system components and wiring diagram.
Schematic diagram of the AWD electrical system with component identification.
Procedure for removing and fitting the ignition and starter lock assembly.
Information on the location, type, and function of the main fuses.
Explanation of the safety system preventing starting/driving under certain conditions.
Procedure for removing and fitting the microswitch for the lifting lever.
Procedure for removing and fitting the microswitch associated with the seat.
Procedure for adjusting the microswitch for the pedal arrangement.
Essential guidelines for maintaining cleanliness in the hydraulic system.
Recommended working methods and cleanliness practices for hydraulic system maintenance.
Diagram identifying components of the AWD hydraulic system.
Information on identifying and connecting hydraulic hoses in the bundle.
To Next Page