Need help?Do you have a question about the Husqvarna Rider 15Ts AWD and is the answer not in the manual?
General| Brand | Husqvarna |
|---|---|
| Model | Rider 15Ts AWD |
| Category | Lawn Mower |
| Language | English |
Procedure for initial inspection and setup before first use.
Tasks to perform after the initial 8 hours of operation.
A welcome message from the manufacturer.
Guidelines for safe operation on public roads and transport.
Precautions and procedures for towing the machine.
Defines the proper applications and limitations of the ride-on mower.
Information on dealer support and service benefits.
Identification and meaning of symbols used in the manual and on the machine.
Locates and names the main parts and controls of the ride-on mower.
Covers essential safety advice, insurance, and general operational guidelines.
Critical safety measures for mowing on inclined terrain.
Safety guidelines for children and during maintenance tasks.
Instructions for safely transporting the machine on a vehicle.
Introduces the machine models and explains throttle, choke, and parking brake.
Details on cutting units, lift lever, and height adjustment.
Covers refueling, release lever, and clutch control system for AWD models.
Steps before starting the engine and the engine start procedure.
Procedures for starting with a weak battery or using jump leads.
How to drive the Rider and use the speed control pedals.
Advice for optimal mowing results and engine shutdown.
A detailed list of maintenance tasks and their intervals.
Procedures for cleaning the machine and removing hoods.
Checking and adjusting the steering wires for proper function.
Adjusting the parking brake and throttle cable for optimal performance.
Adjusting choke cable, replacing fuel and air filters.
Checks and replacement for fuel pump filter, ignition system, and spark plug.
How to ensure all safety interlocks and systems are working correctly.
Procedures for replacing light bulbs, checking the main fuse, and tyre pressure.
Ensuring the engine's cooling air intake is clear for proper operation.
Step-by-step guide for fitting the cutting unit to the machine.
How to detach the cutting unit and set its ground pressure.
Ensuring proper cutting unit alignment and replacing drive belts.
Instructions for placing the cutting unit in service position for maintenance.
Checking blade condition and removing the BioClip plug for different cutting units.
Procedures for checking and changing engine oil and filter.
Checking transmission oil and lubricating the belt adjuster.
General lubrication points and frequency for the entire machine.
A comprehensive table listing common problems and their solutions.
Detailed instructions for preparing the machine for long-term storage.
Information on the protective guard and performing seasonal service.
Key physical dimensions, engine, and electrical system specifications.
Noise, vibration, transmission, and cutting unit specifications.
Specifications for different cutting unit widths, heights, and blade lengths.
Statements of compliance with European Union directives.
To Next Page
