Need help?Do you have a question about the Husqvarna RIDER 175 AWD and is the answer not in the manual?
General| Fuel Type | Gasoline |
|---|---|
| Battery Voltage | 12 V |
| Powder-Coated Cutting Deck | Yes |
| Transmission Type | Hydrostatic |
| Speed Forward, Min-Max | 0-10 km/h |
| Deck Material | Steel |
| Engine Cooling | Air |
| Uncut Circle | 30 cm |
| Drive System | AWD |
| Turning Radius | 30 cm |
Details hazards of fuel, compressed air, and hot mufflers.
Explains battery sparking hazards and prevention methods.
Tool for measuring engine speed, includes safety and operational info.
Details on engine models, power, displacement, and fuel requirements.
Provides torque values for various fasteners and components.
Specifications for different Combi cutting unit models.
Procedures for preparing and delivering the rider to the customer.
Overview of maintenance intervals and procedures.
Guide on how to check the engine oil level.
Steps for installing and charging the battery.
Overview of Rider models and their features.
Explanation of the articulated steering mechanism.
Details on the AWD and hydrostatic transmission system.
Step-by-step guide to remove the B&S engine.
Procedure for performing an engine oil change.
Procedure for adjusting the parking brake's effectiveness.
Procedure for replacing seals on the transmission shaft.
Adjusting cutting unit alignment and height for optimal mowing.
How to sharpen and balance cutting unit blades.
Explanation of the rider's safety interlock systems.
Description and maintenance of the ignition lock.
Guidelines for maintaining cleanliness of the hydraulic system.
How to bleed air from the hydraulic drive system.
To Next Page
