Need help?Do you have a question about the Husqvarna RIDER 175 and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Engine Manufacturer | Briggs & Stratton |
| Deck Material | Steel |
| Engine | Briggs & Stratton |
| Fuel Type | Petrol |
Welcome message, driving, transport, towing, and intended use of the machine.
Information on dealer support, service history, and identifying the machine's serial number.
Explains various symbols used in the manual and on the machine for safety and operation.
Advice on insuring the Rider and general safety guidelines for operation.
Critical safety tips for operating on slopes and ensuring child safety.
Safety precautions related to machine maintenance and transportation.
Identifies and labels all the main controls on the machine.
Machine introduction, parking brake, throttle, speed limiter, and cutting unit details.
Covers cutting unit levers, seat adjustment, and the fuelling process.
Explains the function and operation of the release lever for driving.
Covers pre-start checks, starting a cold/warm engine, and safety during starting.
Instructions for starting with a weak battery and general driving guidance.
Provides cutting tips and procedures for stopping the engine safely.
Provides a comprehensive list of maintenance tasks and their intervals.
Steps for cleaning the machine after use, including warnings.
Guidance on adjusting steering wires, parking brake, and throttle wire.
Procedures for replacing fuel and air filters.
Maintenance for spark plug, battery acid level, and ignition system.
Verifying safety system operation and cleaning cooling air intake.
Instructions for checking ground pressure, adjusting parallelism, and replacing belts.
Placing unit in service position and checking blades.
Procedures for checking and changing engine oil.
Steps for oil filter, transmission oil, and general lubrication.
Lists common engine and machine issues with potential procedures to resolve them.
Steps for preparing the machine for long-term storage, including fuel and battery.
Information on the protective guard and advice for seasonal service.
Details dimensions, engine, electrical system, noise, and vibration levels.
Official declaration of compliance with European directives for the machine.
To Next Page