English-91
REPAIR INSTRUCTIONS
Bleeding the drive system
1. Lift and jack up the machine so that all
wheels can rotate freely.
2. Remove the transmission cover.
3. Fit an exhaust hose.
IMPORTANT INFORMATION
Ensure cleanliness. Used oil may not be
reused. Handle waste oil as environmental
hazardous waste. Avoid skin contact; wash
with soap and water in case of spillage. See
“Hydraulic Hygiene” on page 122.
IMPORTANT INFORMATION
The tank must never be run empty while
work is underway. Fill the tank completely
when filling. Risk of air penetration into the
system.
IMPORTANT INFORMATION
When the controls for the release valves
(bypass valves) in the front or the rear axles
are extended and the engine is running, the
drive pedals must not be activated.
8009-851
Jacking up
6021-030
Transmission cover
WARNING!
Danger of carbon monoxide when
running the engine while working.
!
To Next Page
Loading...
Need help?
General
