Husqvarna 136 LiHD50 - User Manual

Questions and Answers

I
Ian JohnsonJul 31, 2025
What to do if the Error LED flashes on my Husqvarna Trimmer?
- M
  mark07Jul 31, 2025
  If the error LED flashes on your Husqvarna Trimmer, it could be due to several reasons: * **Overload:** The cutting attachment may be jammed. If this is the case, release the cutting attachment. * **Temperature Deviation:** The machine may have overheated. Allow the machine to cool down. * **Simultaneous Activation:** You may be pressing the power trigger and the activate button at the same time. Release the power trigger to activate the machine.
C
Christopher BradleyAug 10, 2025
Why does the Husqvarna 136 LiHD50 Trimmer LED display error LED flash?
- S
  Sophia LaneAug 11, 2025
  The LED display error LED on your Husqvarna Trimmer may flash due to several reasons: * **Overload:** The cutting attachment might be jammed. Try releasing it. * **Temperature deviation:** The machine might be too hot. Allow it to cool down. * **Simultaneous button press:** The power trigger and the activate button might have been pressed together. Release the power trigger to activate the machine.
A
Adam MarquezAug 19, 2025
What to do if the battery and battery charger LED display error LED is flashing on my Husqvarna 136 LiHD50 Trimmer?
- E
  esharpAug 20, 2025
  If the error LED is flashing on the battery and battery charger of your Husqvarna Trimmer, it could be due to: * **Temperature deviation:** Ensure you are using the battery in an environment where the temperature is between -10 °C and 40 °C. * **Over voltage:** Verify that the mains voltage matches the voltage stated on the rating plate of the machine. * **Unknown cause:** Remove the battery from the battery charger.