To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna 180BT and is the answer not in the manual?
Covers owner rights, obligations, manufacturer coverage, commencement date, and length of warranty.
Details what is covered, not covered, how to file a claim, where to get service, and the parts list.
Explains the meaning of WARNING, IMPORTANT, and NOTE labels used in the manual.
Details on safety labels and symbols found on the machine for user safety.
Provides fundamental safety rules and advice for operating the equipment.
Safety advice for operating environment, conditions, and avoiding hazards.
Guidelines for minimizing noise exposure and planning work activities safely.
Critical safety instructions for handling flammable fuel to prevent fire and injury.
Safety checks and procedures required before starting the engine.
Safety measures to follow during the operation of the product.
Essential safety precautions to be observed while performing maintenance.
Safety advice for transporting the unit and preparing it for storage.
Identifies and lists the main parts for the 130BT model.
Identifies and lists the main parts for the 150BT/BF models.
Identifies and lists the main parts for the 170BT/BF models.
Identifies and lists the main parts for the 180BT/BF models.
Details dimensions, weights, engine displacement, air filter, and airflow.
Provides noise level measurements and vibration levels at different speeds.
Instructions for assembling the swivel joint and installing the throttle lever.
Guides for attaching the handlebar and blower tubes to the unit.
Instructions for fitting the harness and attaching the waist belt.
Essential safety rules for fuel handling and procedures for mixing fuel.
Steps for safely fueling the unit and advice on fuel storage.
How to adjust the control arm for comfortable and safe operation.
Step-by-step guide for starting the blower engine, including choke usage.
Instructions for adjusting idle speed and safely stopping the engine.
Detailed steps for cleaning and maintaining the air cleaner element.
Procedures for inspecting and maintaining the fuel filter and spark plug.
Maintenance steps for the muffler and cleaning the spark arrester.
Checks for the air inlet net blockage and ignition coil air gap.
Instructions for replacing the shoulder strap and preparing the unit for storage.
General