EasyManua.ls Logo

Husqvarna 335XPT - User Manual

Husqvarna 335XPT
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operator´s manual
Please read these instructions carefully and make sure
you understand them before using the machine.
English
335XPT

Table of Contents

Other manuals for Husqvarna 335XPT

Preview: Workshop Manual
Workshop Manual44 pages

Questions and Answers

  • P
    Patty HuntAug 17, 2025
    Why Husqvarna Chainsaw will not run at full throttle?
    • D
      Daniel WilliamsAug 17, 2025
      If your Husqvarna Chainsaw won't run at full throttle, consider these potential causes: a blocked air filter, blocked fuel tank ventilator, blocked fuel filter, or a blocked fuel line. Other possible issues include a loose or damaged fuel line, leaking or blocked impulse channel, a loose cover on the carburettor pump side, or a faulty pump diaphragm. Also, check for a leaking manifold, loose carburettor mounting bolts, a control system that is set too low, damaged or incorrectly assembled control system, leaking control diaphragm/cover, a sticking control system, or a blocked muffler. You can start by adjusting the H-screw.
  • S
    Sarah SilvaAug 20, 2025
    Why is Husqvarna Chainsaw carburettor leaking fuel?
    • M
      Matthew FrankAug 20, 2025
      The carburettor of your Husqvarna Chainsaw could be leaking fuel due to a loose or faulty fuel pipe, a hole in the diaphragm, a worn needle valve/needle, a control system that is sticking or set too high, a leak in the control system (air or fuel), or a loose cover on the carburettor pump side.
  • A
    Alicia HubbardAug 22, 2025
    What to do if Husqvarna 335XPT Chainsaw does not accelerate?
    • S
      Stephen VasquezAug 22, 2025
      If your Husqvarna Chainsaw does not accelerate, possible causes include a blocked air filter, fuel tank ventilator, or fuel filter, as well as a blocked or damaged fuel line. Check for a blocked impulse channel, a loose cover on the carburettor pump side, or a faulty pump diaphragm. A leaking manifold, loose carburettor mounting bolts, a control system set too low or incorrectly assembled, a sticking control system, faulty diffuser jets, or a blocked muffler could also be responsible. Adjust the L-screw or H-screw.
  • C
    Christopher JonesAug 26, 2025
    What to do if Husqvarna Chainsaw is idling uneven?
    • C
      Christian MorrisonAug 26, 2025
      If your Husqvarna Chainsaw is idling unevenly, the issue might stem from a blocked fuel filter or fuel line. Other potential causes include a leaking manifold, loose carburettor mounting bolts, or a worn throttle valve shaft, loose throttle valve screw, or worn throttle valve. A sticking control system, a leak in the throttle system, a worn control diaphragm centre knob, a hole in the diaphragm, a leaking control diaphragm/cover plate, or a crankcase leak could also be responsible.
  • L
    lisa84Aug 28, 2025
    What to do if Husqvarna Chainsaw engine stalls when throttle is released?
    • A
      Alexander WrightAug 28, 2025
      If your Husqvarna Chainsaw engine stalls when the throttle is released, consider adjusting the L-screw or H-screw. Other potential causes include a faulty pump diaphragm, a control system set too high or sticking, or faulty diffuser jets.
  • F
    Frank HuberAug 30, 2025
    What to do if Husqvarna 335XPT has too much fuel when idling?
    • C
      Christopher StuartAug 31, 2025
      If your Husqvarna Chainsaw has too much fuel when idling, this could be due to a control system set too high, sticking, damaged, or incorrectly assembled. Other causes may include a worn needle valve or a leaking control diaphragm/cover plate.
  • B
    Belinda OwensSep 2, 2025
    How to fix Husqvarna 335XPT Chainsaw idling too rich?
    • L
      lisamooreSep 2, 2025
      If your Husqvarna Chainsaw is idling too rich, try adjusting the L-screw. Other possible causes include a worn needle valve/needle, a control system set too high, a worn throttle lever in the control system, a leaking control diaphragm/cover plate, or a sticking control system.
  • O
    Oscar NashSep 5, 2025
    What to do if Husqvarna 335XPT Chainsaw is flooding when the engine is not running?
    • J
      Joshua ScottSep 5, 2025
      If your Husqvarna Chainsaw is flooding when the engine is not running, this could be due to a worn needle valve, a control system set too high, or a control system that is sticking.
  • M
    Michelle PerrySep 8, 2025
    What to do if Husqvarna 335XPT has too rich acceleration?
    • P
      Paula BryantSep 8, 2025
      If your Husqvarna Chainsaw has too rich acceleration, you can adjust the L-screw or H-screw. Other potential causes include a blocked air filter, a faulty pump diaphragm, or faulty diffuser jets.
  • R
    Roger JohnsSep 12, 2025
    What to do if Husqvarna 335XPT will not idle?
    • M
      Matthew DavisSep 12, 2025
      If your Husqvarna Chainsaw will not idle, you can try adjusting the L-screw. Other possible causes are a leaking manifold, loose carburettor mounting bolts, a loose or faulty fuel pipe, a blocked fuel filter, a blocked fuel line, or a blocked fuel tank ventilator. Additionally, a stiff throttle lever shaft, a sticking throttle cable, a defective throttle return spring, a bent throttle lever shaft stop, or faulty diffuser jets could be the reason.

Summary

Safety Instructions

Personal Protective Equipment

Details required personal protective equipment for safe chainsaw operation.

Chain Saw Safety Equipment

Explains safety features of the saw and their basic inspection.

Inspecting, Maintaining and Servicing Chain Saw Safety Equipment

Procedures for checking and maintaining safety features of the chainsaw.

Cutting Equipment

How to Avoid Kickback

Explains kickback and provides techniques to prevent it.

General Safety Precautions

General Working Instructions

Assembly

Fuel Handling

Fuelmix

Fuelling

Start and Stop

Cold Engine Start and Operation

Procedure for starting the chainsaw with a cold engine.

Warm Engine Start

Procedure for starting the chainsaw with a warm engine.

Stopping the Engine

Maintenance

Carburettor Maintenance

Oil Pump Adjustment

Daily Maintenance Checks

Husqvarna 335XPT Specifications

General IconGeneral
BrandHusqvarna
Model335XPT
CategoryChainsaw
LanguageEnglish

Related product manuals