Need help?Do you have a question about the Husqvarna 336 339XP and is the answer not in the manual?
Explains general safety symbols and warnings.
Explains symbols related to operating the machine.
Details essential protective gear for chainsaw operation.
Outlines critical safety features of the chainsaw.
Describes manual and automatic activation of the chain brake.
Explains the safety function of the front hand guard.
Prevents accidental throttle operation and catches chain.
Protects hand if chain jumps or snaps.
Minimizes vibrations for easier operation.
Controls engine stop and reduces noise/fumes.
Checks brake band wear and front hand guard condition.
Verifies inertia brake release and trigger function.
Verifies throttle lock and chain catcher functionality.
Checks right hand guard, vibration damping, and stop switch.
Discusses muffler condition and spark arrestor mesh.
Rules for choosing and maintaining cutting equipment.
Explains how bar tip radius affects kickback.
Details different chain link types for kickback reduction.
Guides on sharpening teeth using proper tools and angles.
Explains filing angles, position, diameter, and depth.
How to adjust raker clearance for optimal performance.
Importance and method of keeping the chain properly tensioned.
Discusses types of chain oil and proper usage.
Explains the automatic lubrication system and oil tank capacity.
Steps to verify chain lubrication is working correctly.
How to check saw chain and drive sprocket wear.
Regular checks for bar burrs, wear, and tip condition.
Defines kickback and its causes.
Emphasizes firm grip, stable stance, and full throttle.
Advice on cutting position and avoiding kickback zones.
Rules on fuel, modifications, and detailed pre-start checks.
Importance of knowing kickback effects and cutting edges.
Rules for checking the work area and avoiding obstacles.
Advice on grip, throttle, and cutting speed.
Method for cutting logs supported on the ground.
Emphasizes safe distance and felling direction planning.
Techniques for removing branches and cutting trunks into logs.
Preparing a safe path for retreat after felling.
How to make precise cuts for controlled felling.
Methods for safely freeing a tree that has fallen badly.
Precautions when cutting branches under tension.
Step-by-step guide for attaching the bar and chain.
Instructions for installing a spike bumper.
Details on mixing petrol and two-stroke oil correctly.
Information on chain oil type, viscosity, and maintenance.
Safety measures to take when refuelling the chainsaw.
Step-by-step guide for starting cold and warm engines.
How to stop the engine and properly store the saw.
Explains how to adjust L, H, and T jets for optimal performance.
Guides on replacing worn starter components.
Cleaning and maintaining air filter, muffler, and spark plug.
How to adjust the oil pump for chain lubrication.
How to clean the saw's cooling system to prevent overheating.
Routine checks to perform daily for safe operation.
Recommended checks and cleaning for weekly intervals.
More in-depth checks and replacements for monthly intervals.
To Next Page
General
