Need help?Do you have a question about the Husqvarna 33 and is the answer not in the manual?
Safety instructions and procedures for refueling.
Steps for starting the saw when the engine is cold.
Procedures for starting the saw when the engine is warm.
Detailed steps for starting the chain saw engine.
Instructions on how to shut off the engine.
Explains how the chain brake works and how to engage/disengage it.
How to check the chain brake's stopping power and activation.
Explains the basic settings for the carburettor.
How to adjust the idle speed for proper operation.
Fine-tuning the carburettor for optimal performance.
How to properly tension the saw chain.
Instructions on how to sharpen the saw chain correctly.
How to set and check the depth gauge for optimal cutting.
Procedures to verify that the chain is receiving adequate oil.
To Next Page
General
