2 – English
Symbols:
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective glasses or visor
KEY TO SYMBOLS
Chain oil and chain oil flow adjustment
Protective glasses or a visor must be
worn.
This product is in accordance with applicable
CE directives.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Symbols in the operator’s manual:
Switch off the engine by moving the stop
switch to the STOP position before
carrying out any checks or maintenance.
CAUTION! Chain saws can be dangerous!
Careless or incorrect use can result in
serious or fatal injury to the operator or
others.
Please read the instructions carefully and
make sure you understand them before
using the saw.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Refuelling
Noise emission to the environment
according to the European Community’s
Directive.
The machine’s emission is specified in
chapter Technical data and on label.
To Next Page
Loading...
