Husqvarna 340i - Accessories; Guide Bar and Saw Chain Combinations

340i
Low energy mode savE
Lubrication system
Type of oil pump Automatic
Oil tank capacity, l/cm
3
0.18/180
Weight
Chainsaw without battery, guide bar, saw chain and empty chain oil tank, kg 2.7/2.8 (Tool / Tool less drive sprock-
et cover)
Water protection level
IPX4 Yes
Noise emissions
1
Sound power level, measured dB(A) 99
Sound power level, guaranteed L
WA
dB(A) 101
Sound levels
2
Sound pressure level at the operator's ear, measured according to EN
62841-1
88
Vibration levels
3
Front handle m/s
2
3.2
Rear handle m/s
2
3.2
Saw chain/guide bar
Recommended bar lengths, in/cm 12-16/30-40
Usable cutting length, in/cm 11-15/28-38
Type of drive sprocket/number of teeth Spur/6
Maximum chain speed / (savE), m/s 20/(18)
Accessories
Guide bar and saw chain combinations
The following cutting attachments are approved for
Husqvarna 340i.
1
Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive
2000/14/EC.
2
Reported data for sound pressure level for the machine has a typical statistical dispersion (standard deviation)
of 3 dB (A).
3
Vibration level, according to EN 62841-4-1. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
2
. Declared vibration data from measurements when the machine is fitted with a
bar length and recommended chain type. If the machine is fitted with a different bar length, the vibration level
may vary by max ± 1.5 m/s
2
.
34 1155 - 002 - 13.05.2020