Husqvarna 346XP E-tech - Accessories

Husqvarna 346XP/XPG/E-tech/Trio-
Brake
Husqvarna 353/G/E-tech/TrioBrake
Front handle, m/s
2
2.4 3.1
Rear handle, m/s
2
3.6 3.2
Saw chain/guide bar
Type of drive sprocket/number of
teeth
Rim/7 Rim/7
Saw chain speed at 133% of maxi-
mum engine power speed, m/s.
24.6 23.0
Accessories
Recommended cutting equipment
Chainsaw models Husqvarna 346XP, 346XP TrioBrake,
346XPG, 346XPG TrioBrake, 353, 353 TrioBrake, 353G,
353G TrioBrake, 346XP E-tech, 346XPG E-tech
TrioBrake, 353 E-tech, 353 E-tech TrioBrake, 353G E-
tech have been evaluated for safety according to EN
ISO 11681-1:2011 (Machinery for forestry - Portable
chainsaw safety requirements and testing) and fulfill the
safety requirements when equipped with the below listed
guide bar and saw chain combinations.
Low kickback saw chain
A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in
ANSI B175.1-2012.
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is specified by
the number of teeth, such as 10T. For solid guide bars
the nose radius is specified by the dimension of the
nose radius. For a given guide bar length, you can use a
guide bar with smaller nose radius than given.
Guide bar Saw chain
Length, in/cm Pitch, in Gauge, in/mm Max. nose radius Type Length, drive
links (no.)
13/33 0.325 0.050/1.3 10T Husqvarna H30 56
15/38 64
16/40 66
18/46 72
20/50 78
13/33 0.325 0.058/1.5 10T Husqvarna H25 56
15/38 64
16/40 66
18/46 72
20/50 12T 78
36 1533 - 001 - 22.01.2021