Husqvarna 357XP - Technical Data

36 – English
TECHNICAL DATA
Technical data
357XP 359
Engine
Cylinder volume, cu.in/cm
3
3,45/56,5 3,60/59,0
Cylinder bore, inch/mm 1,81/46 1,85/47
Stroke, inch/mm 1,34/34,0 1,34/34,0
Idle speed, rpm 2700 2700
Power, kW/ rpm 3,2/9600 2,9/9000
Ignition system
Manufacture SEM SEM
Type of ignition system CD CD
Spark plug NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer of carburettor Walbro Walbro
Carburettor type HDA 198 HDA 198
Fuel tank capacity, US pint/litre 1,43/0,68 1,43/0,68
Oil pump capacity at 9,000 rpm, ml/min 6-17 6-17
Oil tank capacity, US pint/litre 0,80/0,38 0,80/0,38
Type of oil pump Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, Lbs/kg 357XP,
357XP E-tech: 12,1/5,5
357XPG,
357XPG E-tech: 12,3/5,6
359, 359 E-tech:12,1/5,5
359G,
359G E-tech: 12,3/5,6
Chain/bar
Standard bar length, inch/cm 15”/38 15”/38
Recommended bar lengths, inch/cm 13-24"/33-61 13-24"/33-61
Usable cutting length, inches/cm 12-23"/31-58 12-23"/31-58
Chain speed at max. power, m/sec 21,4 20,0
Pitch, inch/mm 0,325/8,25 0,325/8,25
3/8" /9,52 3/8" /9,52
Thickness of drive links, inch/mm 0,050/1,3 0,050/1,3
0,058/1,5 0,058/1,5
Number of teeth on drive sprocket 7 7