To Next Page
D
Dan MerrittJul 28, 2025
What to do if my Husqvarna 445e II Chainsaw engine does not start?
- Bbrian38Jul 28, 2025
If your Husqvarna Chainsaw engine doesn't start, here are a few things to check: * Ensure you're using the correct fuel type; if not, drain the tank and refill. * If the fuel tank is filled with chain oil, drain the fuel tank if you have not tried to start the product. * Make sure the spark plug is dry and clean. * Check that the electrode gap is correct and the spark plug type is correct. * Tighten the spark plug if it is loose. * If the engine is flooded due to repeated starts with full choke, remove and clean the spark plug, lay the chainsaw on its side with the spark plug hole facing away from you, and pull the starter rope 6-8 times. Then, reassemble the spark plug and try starting the chainsaw.
General
