To Next Page
E
ehernandezJul 27, 2025
What to do if the red error LED flashes on my Husqvarna 520iHD60 Trimmer?
- DDebra HernandezJul 27, 2025
A flashing red error LED indicates a few potential issues. It could be due to overload: in this case, stop the product, remove the battery, clean the cutting attachment, and loosen the chain. It might also indicate a temperature deviation, so let the product cool down. Finally, it can happen if you're pushing the power trigger and the start button simultaneously; release the power trigger and then push the start button.
General
