What to do if my Husqvarna 525RX Trimmer starts but doesn't stay running?
If your Husqvarna Trimmer starts but doesn't stay running, there are several possible causes. It could be due to an incorrect fuel type, in which case you should drain the fuel tank and use the correct fuel. Another cause may be a dirty air filter, so try cleaning the air filter. Also, the fuel filter may be clogged and need replacement.
How to fix no spark on a Husqvarna 525RX Trimmer?
If there is no spark in your Husqvarna Trimmer, start by checking the spark plug. Ensure that the spark plug is dry and clean. Also, verify that the electrode gap is correct and that the spark plug is installed with a suppressor. Refer to technical data for correct electrode gap.
What to do if the spark plug is loose on a Husqvarna 525RX Trimmer?
If the spark plug is loose on your Husqvarna Trimmer, tighten it.
How to fix binding starter pawls on a Husqvarna Trimmer?
To fix binding starter pawls on your Husqvarna Trimmer, adjust or replace the pawls. Also, clean around the pawls.
What to do if the stop switch on my Husqvarna Trimmer is in the stop position?
If the stop switch on your Husqvarna Trimmer is in the stop position, set it to the start position.
General| Engine displacement | 25.4 cm³ |
|---|---|
| Power output | 1 kW |
| Weight | 4.9 kg |
| Sound pressure level at operator's ear | 94 dB(A) |
| Engine type | 2-stroke |
Identifies all parts of the brush cutter using numbered diagrams for easy reference.
Describes the function of the throttle lockout to prevent accidental operation.
Explains the guard's purpose and checks for damage.
Describes the system designed to minimize operational vibration.
Details muffler function, maintenance, and safety warnings regarding heat.
Covers selection, maintenance, and safety of blades and trimmer heads.
Instructions on winding trimmer cord and using different trimmer heads.
Step-by-step guide for attaching and adjusting the handlebar.
Instructions for connecting and separating the two-piece shaft.
Details on correctly fitting cutting attachments to the drive shaft.
Procedure for mounting grass blades and guards.
Steps for attaching the blade guard and saw blade.
Instructions for fitting various guards and attachments.
Guidance on adjusting the harness for proper fit and operation.
Details on the standard harness quick release and load distribution.
Important precautions for handling fuel safely to prevent fire and injury.
Guidelines for safe transport and long-term storage of the machine and fuel.
Procedures and safety measures for refuelling the machine.
Pre-start checks to ensure the machine is safe to operate.
Step-by-step instructions for starting the engine and stopping it.
Procedure for safely stopping the engine using the stop switch.
Basic safety and operational guidance for using the brush cutter.
Techniques for efficient clearing, including safety considerations.
Specific techniques for felling trees and cutting stems with a saw blade.
Methods for cutting thin stems and brush using a saw blade.
Instructions for clearing tall or coarse grass with a grass blade.
Techniques for trimming grass and vegetation with the trimmer head.
Methods for removing unwanted vegetation using the trimmer head.
How to use the trimmer for cutting grass in hard-to-reach areas.
Using the trimmer's cord for quick clearing and sweeping debris.
Explains carburettor function, adjustment, and basic settings.
Details the cooling system components and cleaning procedures.
Information on spark plug condition, cleaning, and replacement.
Steps for cleaning and replacing the air filter to prevent malfunctions.
Instructions for checking and lubricating the bevel gear.
Guidance on lubricating the drive shaft ends for two-piece shafts.
A comprehensive schedule of daily, weekly, and monthly maintenance tasks.
Specifications for engine, fuel, weight, noise, and vibration levels.
Lists compatible cutting attachments, guards, and their part numbers.
Official declaration of compliance with EU directives and applied standards.
To Next Page
