To Next Page
M
Mary ClarkJul 26, 2025
How to start a Husqvarna Brush Cutter when the engine won't start?
- TtlarsonJul 26, 2025
If your Husqvarna Brush Cutter's engine won't start, there are several things to check: * Ensure the stop switch is in the start position. * If the starter pawls are stuck, remove the starter cover and clean around them. * Make sure you're using the correct fuel type; drain the tank and refill if needed. * Inspect the spark plug to ensure it is clean and dry. * Verify the spark plug electrode gap is correct and that the spark plug has a suppressor. * Also, confirm the spark plug is tightened properly.
General
