What to do if my Husqvarna 525RXT starts but doesn't stay running?
If your Husqvarna Trimmer starts but doesn't stay running, there are several possible causes. It could be due to an incorrect fuel type, in which case you should drain the fuel tank and use the correct fuel. Another cause may be a dirty air filter, so try cleaning the air filter. Also, the fuel filter may be clogged and need replacement.
How to fix no spark on a Husqvarna 525RXT Trimmer?
If there is no spark in your Husqvarna Trimmer, start by checking the spark plug. Ensure that the spark plug is dry and clean. Also, verify that the electrode gap is correct and that the spark plug is installed with a suppressor. Refer to technical data for correct electrode gap.
What to do if the spark plug is loose on a Husqvarna 525RXT?
If the spark plug is loose on your Husqvarna Trimmer, tighten it.
How to fix binding starter pawls on a Husqvarna 525RXT?
To fix binding starter pawls on your Husqvarna Trimmer, adjust or replace the pawls. Also, clean around the pawls.
What to do if the stop switch on my Husqvarna 525RXT is in the stop position?
If the stop switch on your Husqvarna Trimmer is in the stop position, set it to the start position.
General| Engine Type | 2-stroke |
|---|---|
| Line Diameter | 2.4 mm |
| Tube diameter | 24 mm |
| Shaft Type | Straight |
| Displacement | 25.4 cm³ |
| Starter System | Recoil |
Details essential safety gear including helmet, eye, ear, and hand protection for safe operation.
Explains the function of the throttle lockout to prevent accidental operation.
Critical safety precautions regarding fuel spills, leaks, and general handling to prevent fire and injury.
Information on recommended petrol octane, approved two-stroke oil, and correct mixing ratios.
Step-by-step guide on how to correctly mix petrol and two-stroke oil for the engine.
Safety instructions and procedures for refueling the machine to prevent fire and explosion.
Essential pre-operation checks to ensure the machine is safe and ready for use.
Detailed steps for safely starting the engine and shutting it down.
Instructions on how to safely stop the engine using the stop switch.
Fundamental safety guidelines for the operator, including awareness of surroundings and proper stance.
Information on carburettor function, adjustment, and recommended settings for optimal performance.
Detailed technical data for the engine, including displacement, bore, stroke, and speed ratings.
Technical details on the ignition system, spark plug, fuel tank capacity, and lubrication.
Data on sound power, sound pressure, and vibration levels for operator comfort and safety.
To Next Page
