Need help?Do you have a question about the Husqvarna 525 LST and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Displacement | 25.4 cm³ |
| Shaft Type | Straight |
| Starter System | Smart Start |
| Vibration Damping | Yes |
| Power Output | 1 kW |
| Fuel Tank Volume | 0.5 liters |
| Line Diameter | 2.0 mm |
| Cutting Attachment | Tap 'n Go trimmer head |
Key safety rules and warnings for safe operation of the machine.
Details on essential protective gear for safe operation.
Explains the function and operation of the throttle lockout for preventing accidental acceleration.
Instructions on using the stop switch to turn off the engine.
Importance and checks for the cutting attachment guard to prevent thrown objects.
Information about the vibration damping system and its maintenance.
Details on the quick release feature for safety in emergencies.
Guidance on checking, cleaning, and safety precautions related to the muffler.
Instructions on how to correctly fit and tighten the locking nut for cutting attachments.
Guidelines for choosing and using cutting attachments, and blade thrust warnings.
Rules for using recommended attachments, sharpening blades, and checking for damage.
Best practices for winding trimmer cord, cord length, and trimmer guard cutter.
Instructions on how to sharpen grass blades and knives correctly.
Step-by-step guide for attaching the loop handle to the shaft.
Instructions for assembling the handlebar onto the machine.
General instructions for fitting cutting attachments and guards.
Guide for attaching the trimmer guard and trimmer head correctly.
Steps for assembling and dismantling the two-piece shaft.
Instructions for attaching blade guards, grass blades, and grass cutters.
How to securely hook the brush cutter to the harness for safe operation.
Steps for fitting and adjusting the harness for comfort and balance.
How to adjust the harness suspension for optimal balance during use.
Warnings and guidelines for safe handling, transport, and storage of fuel.
Information on recommended petrol, two-stroke oil, and correct mixing ratios.
Step-by-step guide for correctly mixing petrol and two-stroke oil.
Essential precautions to take when refueling the machine to prevent fires.
Essential inspections of the cutting attachment, guards, and fittings before starting.
Detailed steps for safely starting and stopping the engine.
Using the choke control and starter cord for engine ignition.
How to use the throttle trigger and lockout for engine speed control.
Basic safety rules and advice for working with brush cutters and trimmers.
Essential safety guidelines covering the working area, weather, and operator stance.
Techniques for using grass blades and knives for clearing tall or coarse grass.
Guidance on trimming and clearing grass with a trimmer head.
Using the trimmer for cutting grass in hard-to-reach areas.
Using the rotating cord for clearing up loose material.
Information on carburettor function, idle speed, and fuel mix adjustments.
Procedure for adjusting the idle speed screw to stop cutting attachment rotation.
Procedure for setting the correct start throttle speed using an adjuster screw.
Guidance on cleaning spark arrestor mesh and safety for catalytic converters.
Importance of cleaning the cooling system to prevent overheating and engine damage.
Factors affecting spark plug condition and how to clean and check the electrode gap.
Steps for cleaning the air filter to ensure optimal engine performance and prevent wear.
Comprehensive guide on cleaning the air filter, including felt filters and replacement.
Information on checking and maintaining the grease level in the bevel gear.
A table outlining daily, weekly, and monthly maintenance tasks for the machine.
Detailed specifications for engine displacement, speed, output, and ignition system.
Information on carburettor type, fuel tank capacity, and weight.
Reported data for equivalent sound pressure and vibration levels.
List of approved cutting attachments, their types, and corresponding guard part numbers.
To Next Page
