MAINTENANCE
English – 37
Heated handles
550XPG, 550XPG TrioBrake
On models with the model code XPG both the front
handle bar and the rear handle are equipped with
electrical heating coils. These are supplied with electricity
from a generator built into the chain saw.
When the switch is pushed upwards, the heat is switched
on. When the switch is pushed downwards, the heat is
switched off.
Electrical carburettor heating
550XPG, 550XPG TrioBrake
On models with the designation XPG there is an
electrically heated carburettor. Electrically powered
heating prevents ice formation in the carburettor. A
thermostat regulates the heating so that the carburettor
always has the right working temperature.
To Next Page
Loading...
