Need help?Do you have a question about the Husqvarna 550XPG TrioBrake and is the answer not in the manual?
General| Cylinder Displacement | 50.1 cm³ |
|---|---|
| Maximum Power Speed | 10200 rpm |
| Chain Pitch | 3/8" |
| Weight (excl. cutting equipment) | 5.2 kg |
| Sound Power Level, Guaranteed (LWA) | 116 dB(A) |
| Fuel Tank Volume | 0.5 L |
| Bar Length | 13-20 in |
| Chain Gauge | 0.05 in |
| Vibration Level (front/rear handle) | 3.3/4.9 m/s² |
Explains symbols displayed on the chainsaw itself.
Explains symbols used throughout the operator's manual.
Highlights crucial warning symbols, such as those for kickback and general hazards.
A welcome message from the manufacturer to the customer.
Identifies and labels the various components of the chain saw.
Initial checks and fundamental safety rules before operating the saw.
Details essential personal protective equipment required for safe operation.
Understanding kickback causes and methods to prevent it.
Explains the function and operation of the chain brake and other safety features.
Guidelines for selecting, maintaining, and sharpening cutting equipment.
Procedures for chain tensioning, lubrication, and safe storage of the machine.
Proper stance, grip, and situational awareness for safe operation.
Techniques for cutting logs and felling trees safely and effectively.
Safety procedures for dealing with hazardous situations like tensioned wood and trapped trees.
Information on fuel types, correct mixing ratios, and engine running-in procedures.
Guidance on selecting and using appropriate chain oil for lubrication.
Safe practices and precautions to follow when refueling the chainsaw.
Detailed steps for starting and stopping the engine of the chainsaw.
Adjusting the carburettor and engine for optimal performance and emissions.
Importance of maintaining all safety features of the chainsaw.
Inspecting the chain brake and front hand guard for proper function.
Routine maintenance for air filter, spark plug, and critical lubrication points.
Adjusting the oil pump and maintaining the cooling system for engine health.
Precautions for cold weather operation and information on heated components.
A list of recommended maintenance tasks categorized by frequency.
Technical details of the engine, ignition system, and fuel/lubrication systems.
Data on noise, sound, vibration levels, and machine weight.
Approved guide bar and saw chain combinations for the specific models.
Statement of conformity with relevant European Union directives.
To Next Page
