Need help?Do you have a question about the Husqvarna 550XP TrioBrake and is the answer not in the manual?
General| Cylinder Displacement | 50.1 cm³ |
|---|---|
| Maximum Power Speed | 10200 rpm |
| Chain Pitch | 3/8" |
| Sound Pressure Level | 106 dB(A) |
| Fuel Tank Volume | 0.52 liters |
| Oil Tank Volume | 0.27 l |
| Recommended Bar Length, Min-Max | 13-20 in |
| Chain Gauge | 0.05 in |
Various symbols indicating machine features, safety warnings, and operational indicators.
Symbols for refuelling, oiling, adjustments, and starting operations.
Details about emission control standards and information.
Specific warning labels regarding kickback and fire hazards.
A greeting and introduction to the Husqvarna product.
A labeled diagram identifying parts of the chain saw.
Important checks and precautions before using the chain saw for the first time.
Critical warnings regarding machine modification, misuse, and hazards.
Advice on using common sense and wearing personal protective equipment.
Explanation of the machine's built-in safety equipment.
Detailed explanation of how the chain brake is activated and its function.
Questions and answers about chain brake activation and protection.
Explanation of throttle lockout, chain catcher, and vibration damping.
Warnings about vibration exposure and muffler safety.
Guidelines for choosing and maintaining cutting equipment.
Details on guide bars and chains designed to reduce kickback.
Definitions of terms describing guide bars and saw chains.
Instructions and advice on sharpening cutting teeth and adjusting depth gauges.
Procedures for adjusting depth gauges and tensioning the chain.
Guidance on lubricating cutting equipment and chain oil.
Checking chain lubrication, drive sprockets, and needle bearing lubrication.
Daily checks for wear on the chain and guide bar.
Step-by-step instructions for assembling the bar and chain.
Guidelines for gasoline, two-stroke oil, and fuel mixing ratios.
Advice on selecting and using chain oil.
Safe practices for refueling and handling fuel.
Instructions for transporting and storing the chain saw and fuel.
Step-by-step guide for starting the chain saw (cold and warm engines).
Instructions on using the chain brake before and after starting.
Procedure for safely stopping the chain saw engine.
Essential checks to perform before operating the chain saw.
Basic safety rules and techniques for chain saw operation.
Proper hand grip and body positioning for control and safety.
Advice on cutting methods and avoiding kickback and workpiece issues.
General principles and terms for cutting wood with a chain saw.
Techniques for limbing branches and cutting logs safely.
How to cut logs based on their position and support.
Principles of tree felling, including safe distance and felling direction.
Steps for preparing for felling, including directional and felling cuts.
Ensuring felling control and procedures for freeing trapped trees.
Safe methods for cutting branches or trees under tension.
Understanding what kickback is and how to prevent it.
Specific techniques for limbing and cutting logs into sections.
Overview of user maintenance, carburetor adjustment, and AutoTune system.
Instructions for checking and maintaining chain brake and front hand guard.
Procedures for checking inertia brake release, brake trigger, and throttle lockout.
Checks for chain catcher, right hand guard, and vibration damping units.
Procedures for checking the stop switch and maintaining the muffler.
Steps for changing a broken or worn starter cord.
How to tension the recoil spring when fitting the starter.
Procedures for changing recoil springs and cleaning the air filter.
Checking and maintaining the spark plug for optimal engine performance.
Lubricating the bar tip sprocket and needle bearing.
Adjusting the oil pump and cleaning the cooling system.
Centrifugal cleaning system maintenance and precautions for winter use.
Information on heated handles and electrical carburetor heating systems.
Detailed technical data for motor, ignition, fuel, and chain/bar components.
Lists approved guide bar and saw chain combinations for US models.
Specifications for chain filing angles, file gauges, and chain types.
Overview of the federal emissions control system warranty for small nonroad engines.
Details on parts covered by warranty and exclusions like abuse or neglect.
Lists specific parts covered under the emission control warranty.
Owner's responsibility for performing required maintenance.
General safety precautions for chain saw users, including kickback avoidance.
Additional safety advice covering fatigue, PPE, fuel handling, and operating damaged equipment.
To Next Page