What to do if my Husqvarna 550XP G Mark II engine starts but stops again?
If your Husqvarna Chainsaw engine starts and then stops, several factors could be responsible. The fuel tank may contain incorrect fuel; drain the fuel tank and fill with the correct fuel. The air filter may be dirty; clean or replace the air filter. The fuel filter may need replacing; replace the fuel filter.
General| Engine Power | 3.0 kW |
|---|---|
| Cylinder Displacement | 50.1 cm³ |
| Weight (excl. cutting equipment) | 5.5 kg |
| Heated Handle | Yes |
| Bar Length | 13-20 inches (33-50 cm) |
| Fuel Tank Volume | 0.52 l |
| Oil Tank Volume | 0.26 liters |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.058 inches |
Details the function and operation of the chain brake and front hand guard.
Detailed steps for attaching the guide bar and saw chain to the chainsaw.
Pre-operation checks to ensure the chainsaw is safe and functional.
Information on the correct type of fuel and mixing instructions for the chainsaw.
Step-by-step guide on how to safely refuel the chainsaw.
Guidance on selecting and using the appropriate chain oil for lubrication.
Answers to frequently asked questions regarding kickback scenarios and chain brake.
Steps to prepare the chainsaw for starting a cold engine.
Procedures for checking the functionality of the chainsaw's safety features.
Troubleshooting steps for when the chainsaw engine fails to start.
Troubleshooting steps for when the chainsaw engine starts but then stops.
Detailed safety measures to prevent and mitigate kickback incidents.
To Next Page