Husqvarna 545 - Assembling the Complete Crankshaft

62 - English
7.26 Assembling a complete crankshaft
1
Fit the complete crankshaft in the crankcase.
Fit the following parts
• The piston and cylinder 
• The fuel unit 
• The handle system 
• The mufer 
• The hand guard 
• The bottom of the carburettor 
• The carburettor 
• The ywheel 
• The starter 
• The cylinder cover
• The centrifugal clutch 
• The chain and bar.
• The clutch cover
 See specic instruction.
Repair Instructions