18 Instruction book Lily 555/545
Functions
STOP
The STOP button is used to
fi nish a stitch. i.e. the machine
fastens the thread and stops
automatically when the stitch
has been completed. The symbol
on the display indicates that STOP
is selected. STOP is cancelled when
you press the button again or by
selecting a new stitch.
The button has the same function
both in NORM and REP position
Mirror image
You can mirror a stitch by using
the buttons , mirror image side
to side and , mirror image
end to end . The symbols will
be displayed.
Stitch width
When you select a stitch, the
machine automatically sets the
best stitch width which is dis-
played with numbers on the In-
fodisplay. You can change the stitch
width by pressing the (+) or (-)
button. The width can be adjusted
between 0 and 6 mm. Not active in
REP position.
MENU - Selected group of
stitches - Model 555
Your machine has six menus -
three for stitches, three for let-
ters. Your choice is displayed
when you have pressed the MENU
button.
MENU - Selected group of
stitches - Model 545
Your machine has two menus -
one for stitches, one for letters.
Your choice is displayed when
you have pressed the MENU button.
FUNC - Selected function
When you turn on the mach-
ine, the selected function dis-
plays NORM. Touch the FUNC
button to PROG for programming. If
you touch the button again, REP =
repeat will be displayed to sew your
programmed stitches. After a third
touch, NORM is displayed again.
Memory - position
These buttons are used to
advance or return within
a memory, when entering
or checking stitches. See
page 22.
Functions / Info-display
To Next Page
Loading...
