KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chainsaws can be
dangerous! Careless or incorrect use
can result in ser
ious or f
atal injury to the
operator or others.
Please read the operator’s manual
carefully and mak
e sure y
ou understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directiv
es.
Noise emission to the environment
according to the European Comm
unity’s
Directive. The machine’s emission is
specified in the Technical data chapter
and on the label.
Chain brake, activated (right)
Chain br
ake, not activated
(left)
Decompression valve
Ignition; choke
Air purge
Adjustment of the oil pump
Refuelling.
Chain oil fill.
If your machine bears this symbol it
is equipped with heated handles.
Other symbols/decals on the mac
hine refer to special
cer
tification requirements f
or certain markets.
Symbols in the operator’
s
manual:
Switch off the engine b
y
moving the star
t/stop switch to
the STOP position before
carrying out any checks or
maintenance. CAUTION! The
start/stop switch automatically
returns to run position. In order
to prevent unintentional starting, the spark plug cap must
be removed from the spark plug when assembling,
checking and/or performing maintenance.
Always wear approved protective
glo
v
es.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
wo
rn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged when
the chainsa
w is star
ted.
WARNING! Kickback may occur when the
nose or tip of the guide bar touches an
object, and cause a lightning f
ast re
verse
reaction, kicking the guide bar up and
towards the operator. May cause serious personal injury.
To Next Page
Loading...
