Husqvarna 8024STE User Manual

Instruction manual
Please read these in struc tions care-
ful ly and make sure you un der stand
them before using this ma chine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
fältig durch und vergewissern Sie sich,
daß Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le
manuel d'instructions. Assurez-vous
d'avoir tout compris avant d'utiliser ce
tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y com-
prenda estas intrucciones an tes
de usar esta maquina.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
ma chine gebruikt.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed
accertatevi di averle comprese bene.
5524ST, 8024STE,
9027STE, 1130STE

Husqvarna 8024STE Specifications

General

Intake Height	23 in
Drive System	Wheel Drive
Electric Start	Yes
Number of Forward Speeds	6
Headlight	Yes
Remote Chute Rotation	Yes
Auger Material	Steel
Chute Control	Remote
Engine Type	Four-stroke
Clearing Width	24 inches
Stages	Two-Stage
Tire Size	15 x 5 inches
Starter Type	Recoil and electric

Summary

Safe Operation Practices for Snow Throwers

Training

Learn controls, stop unit, disengage controls.

Operation

Safe use of controls, caution on slopes, hazards.

How to Set Up Your Snow Thrower

How to Use Your Snow Thrower

Stopping the Snow Thrower

Procedures for stopping the snow thrower, engine, and traction.

To Use Fuel Shut-Off Valve (F)

Throttle and Choke Controls

To Use Throttle Control (C)

To Use Choke Control (E)

To Control Snow Discharge

Controlling Discharge Direction

Adjusting the chute position for desired snow throw direction.

Controlling Discharge Distance

Adjusting the deflector for desired snow throw distance.

To Move Forward and Backward

Self-Propelling Controls

Using the traction drive control lever for movement.

Speed and Direction Controls

Adjusting speed and direction with the drive speed control lever.

Power Steering Operation

To Adjust Skid Plates (N)

Skid Plate Adjustment Procedure

Before Starting the Engine

Check Engine Oil Level (Q)

Procedure for checking the engine oil level before operation.

Add Gasoline (R)

Instructions for safely adding gasoline to the fuel tank.

To Start Engine

Cold Start - Electric Starter

Steps for starting a cold engine using the electric starter.

Cold Start - Recoil Starter

Steps for starting a cold engine using the recoil starter.

ENGINE

Lubrication

CLEANING

Shear Bolts

Auger Shear Bolts

Impeller Shear Bolts

STORAGE

Immediately Prepare Your Snow Thrower for Storage

Troubleshooting

Does Not Start

Common causes and corrections for engine starting issues.

Loss of Power

Causes and solutions for reduced engine power or performance.

Excessive Vibration

Recoil Starter is Hard to Pull