To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna 924HV and is the answer not in the manual?
General| Engine Displacement | 208 cc |
|---|---|
| Clearing Width | 24 inches |
| Auger Diameter | 12 inches |
| Transmission Type | Friction Disc |
| Chute Rotation | 190 degrees |
| Engine Manufacturer | LCT |
| Stages | Two-stage |
| Auger Material | Steel |
| Impeller Diameter | 12 inches |
| Number of Gears | 6 forward, 1 reverse |
| Tire Size | 13 inches |
| Fuel Capacity | 0.71 gallons |
Instructions for safe and proper operation of the snow thrower.
Steps to ensure safe and effective preparation before using the snow thrower.
Guidelines for operating the snow thrower safely and efficiently.
Lists and diagrams of parts provided separately in the carton for assembly.
Detailed steps for assembling and setting up the snow thrower.
Procedure for installing speed and traction drive control rods.
Steps for installing the discharge chute and related components.
Installation of the remote control for the chute deflector.
Instructions for checking and adjusting tire pressure for optimal performance.
Familiarization with controls, symbols, and safety warnings.
Methods for safely stopping the traction drive and engine.
Proper usage of the fuel shut-off valve for operation and storage.
Instructions for using the choke control for starting a cold engine.
How to control the direction and distance of snow discharge.
Engaging the auger to throw snow and release to stop.
Safe procedures for using the clean-out tool to dislodge blockages.
Controlling self-propelling movement using traction drive and speed levers.
Using steering triggers to maneuver the snow thrower.
Adjusting skid plates for different surface conditions.
Detailed instructions for starting the engine using electric or recoil starters.
Advice for efficient and effective snow removal in various conditions.
Recommended schedule for checking and servicing snow thrower components.
Guidance on maintaining the product to ensure warranty and performance.
Essential checks to perform before operating the snow thrower.
Guide for lubricating various parts of the snow thrower.
Inspection and replacement guidelines for drive belts.
Procedures for checking and changing engine oil.
Information on spark plug replacement and specifications.
Best practices for cleaning the snow thrower after use.
Procedure for replacing shear bolts on augers and impeller.
Steps to remove the belt cover for maintenance access.
Detailed instructions for replacing auger and traction drive belts.
Procedure for removing wheels for servicing.
Information on engine speed, governor, and cable tension adjustment.
Steps to prepare the snow thrower for long-term storage.
Handling the fuel system to prevent deposits and damage during storage.
Procedures for draining oil and preparing the cylinder for storage.
Common causes and corrections for engine starting issues.
Troubleshooting steps for reduced engine power.
Solutions for engine idling or running roughly.
Identifying and addressing causes of excessive vibration.
Troubleshooting a hard-to-pull recoil starter.
Diagnosing issues with traction drive and speed.
Resolving problems with snow discharge or auger speed.
Details of what the limited warranty covers and its duration.
Components and conditions not covered by the limited warranty.
Owner's duties to maintain the product and preserve warranty rights.
Procedures for seeking warranty service and contacting authorized dealers.
