Husqvarna 9027STE User Manual

Instruction manual
Please read these in struc tions care-
ful ly and make sure you un der stand
them before using this ma chine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
fältig durch und vergewissern Sie sich,
daß Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le
manuel d'instructions. Assurez-vous
d'avoir tout compris avant d'utiliser ce
tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y com-
prenda estas intrucciones an tes
de usar esta maquina.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
ma chine gebruikt.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed
accertatevi di averle comprese bene.
9027STE

Husqvarna 9027STE Specifications

General

Engine Type	4-cycle OHV
Drive System	Dual-stage auger
Number of Forward Speeds	6
Electric Start	Yes
Headlight	Yes
Scraper Bar	Yes
Auger Material	Steel
Housing Material	Steel
Clearing Width	27 inches
Starter Type	Electric/Manual
Stages	Two-Stage

Summary

Safe Operation Practices for Snow Throwers

Operation

Guidelines for safe and effective use of the snow thrower.

Maintenance and Storage

How to set up your snow thrower

Install speed control rod

Install traction drive control rod

Install auger control rod

Install discharge chute / chute rotater head

Install chute deflector remote control

Check tire pressure

How to use your snow thrower

Stopping

Procedures for safely stopping the traction drive, auger, and engine.

To control snow discharge

To move forward and backward

To adjust skid plates (N)

BEFORE STARTING THE ENGINE

Check engine oil (Q)

How to check and maintain the engine oil level.

Add gasoline (R)

Instructions for safely adding gasoline to the fuel tank.

To start engine

COLD START - ELECTRIC STARTER

Procedure for starting a cold engine with the electric starter.

COLD START - RECOIL STARTER

Procedure for starting a cold engine with the recoil starter.

Snow throwing tips

ENGINE

Lubrication

Detailed instructions for checking and changing engine oil.

Carburetor

Shear bolts

Auger shear bolts

Impeller shear bolts

To replace belts

STORAGE

Troubleshooting

Does not start

Diagnosing and fixing issues when the engine fails to start.

Loss of power

Engine idles or runs roughly

Excessive vibration

Loss of traction drive / slowing of drive speed