Need help?Do you have a question about the Husqvarna 924SB and is the answer not in the manual?
General| Manufacturer | Husqvarna |
|---|---|
| Product Name | 924SB |
| Product Category | Snow Blower |
| Engine | Husqvarna |
| Engine Type | 4-Cycle |
| Engine Displacement | 208 cc |
| Clearing Width | 24 inches |
| Drive Type | Self-Propelled |
| Speed Settings | 6 Forward / 1 Reverse |
| Chute Control | Remote |
| Auger Material | Steel |
| Skid Shoes | Adjustable |
| Intake Height | 21 inches |
| Fuel Tank Capacity | 0.5 gallons |
| Stages | Two-Stage |
General safety precautions and warnings for snow thrower use.
Instructions for understanding controls and proper use before operating.
Steps to take before starting, including checks and fuel handling.
Safely clearing clogged discharge chutes using the provided tool.
Identifies parts packed separately and provides unpacking instructions.
Steps for unfolding and securing the upper handle.
Guide for installing speed, traction drive, and auger control rods.
Procedure for attaching the discharge chute and rotater head.
Instructions for setting correct tire pressure for optimal performance.
Familiarize yourself with the snow thrower's controls and safety symbols.
Step-by-step guide for starting the engine using electric or recoil methods.
Procedures for safely stopping the traction drive, auger, and engine.
Adjusting speed, direction, and snow throw distance.
Safely clearing clogged chutes and adjusting skid plates.
Advice for efficient and effective snow removal in various conditions.
Overview of required maintenance tasks and their frequency.
Essential checks to perform before starting the snow thrower.
Guidelines for lubricating snow thrower components.
Safety warnings and procedures before performing service or adjustments.
How to adjust the snow thrower height using skid plates.
Procedures for replacing auger and impeller shear bolts.
Steps for removing and replacing auger and traction drive belts.
Guide for removing and reattaching the snow thrower wheels.
Steps to prepare the snow thrower for long-term storage.
Procedures for storing the engine and fuel system to prevent damage.
Lists causes and corrections for engine not starting issues.
Addresses causes for loss of power and rough engine idle.
Solutions for excessive vibration and drive speed problems.
Identifies components of the auger housing and impeller assembly.
Lists parts for the control panel and discharge chute assembly.
Details parts for the snow thrower's handle assemblies.
Identifies various parts within the drive system.
Lists components related to the chassis, engine, and pulleys.
Identifies wheel assemblies and related parts.
To Next Page