To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna CHAIN SAW 266 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Displacement | 66.7 cm³ |
| Weight (excl. cutting equipment) | 6.4 kg |
| Chain Gauge | 0.058 inches |
| Oil Tank Capacity | 0.4 l |
| Chain Pitch | 3/8 inches |
Diagram and labels identifying key parts of the chain saw.
Guide on how to assemble the guide bar and chain.
Information on the correct fuel and oil mixture and usage.
Description of the chain brake activation mechanism.
Procedures for cleaning and checking the chain brake.
Procedure to adjust the chain brake release force using a screw.
Steps for starting the chain saw engine when it is cold.
Steps for starting the chain saw engine when it is warm.
Initial adjustments for the carburetor's low and high speed needles.
Detailed procedure for adjusting the low speed (L) needle.
Detailed procedure for adjusting the high speed (H) needle.
Steps for cleaning the air filter for optimal engine performance.
Procedure for replacing the starter cord and return spring.
Considerations for operating the chain saw in cold weather conditions.
Procedure for adjusting the oil pump output for different bar lengths.
Routine tasks for daily upkeep of the chain saw.
Tasks to perform on a weekly basis for maintenance.
Tasks to perform on a monthly basis for maintenance.
Safety precautions during handling and transport of the chain saw.
Recommended personal protective equipment for safe operation.
Safety guidelines and procedures for operating the chain saw.
