Need help?Do you have a question about the Husqvarna Jonsered CS 2245 and is the answer not in the manual?
Overview of the workshop manual's purpose, scope, and content.
Crucial safety information, warnings, and precautions for repair work.
Defines the intended users and required knowledge for manual comprehension.
Information on product modifications and manual updates.
Lists general and special tools needed for service procedures.
Explains the organization and usage methods of the manual.
Details numbering conventions for components and figures.
Basic instructions for workshop setup and personnel qualifications.
Critical warnings on fuel, air usage, and component handling.
Identification of symbols embedded on the chainsaw.
Explanation of warning symbols used within the workshop manual.
Details displacement, bore, stroke, power output, and RPM.
Covers spark plug gap, ignition type, air gap, and carburettor.
Provides chain length, speed, pitch, and drive link dimensions.
Lists idling/engagement speeds, fuel/oil tank capacities.
Details the weight of the chainsaw with and without attachments.
Visual presentation of essential special tools for servicing.
Specifies the purpose and part numbers for each tool.
Critical torque values for assembling engine and clutch components.
Additional torque settings for various parts.
Procedures for dismantling, cleaning, and reassembling the chain brake.
Instructions for removing, cleaning, and refitting the silencer.
Steps for replacing a worn chain catcher.
Testing stop switch resistance and assembling choke/stop controls.
Removal and refitting of throttle lock, trigger, and spring.
Repair procedures for the starter assembly and cord.
Service for ignition module, flywheel, and testing.
Dismantling and assembly of centrifugal clutch and oil pump.
Comprehensive guide to carburettor service and adjustment.
Maintenance for fuel tank, filter, hoses, and air intake components.
Repair procedures for piston, cylinder, and crankshaft.
Methods for repairing threads and replacing bar bolts.
Common faults and causes when starting the chainsaw.
Troubleshooting for incorrect idling and engine speed.
Diagnosing problems with acceleration, power, and stalling.
General procedures for component-level fault diagnosis.
To Next Page
General