To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna CRT81 and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Tine Location | Rear |
| Number of Tines | 4 |
| Rotating Direction | Counter-rotating |
| Reverse | Yes |
| Engine Type | 4-stroke |
| Transmission Type | Chain |
| Tilling Depth | 15 cm |
| Wheels | Pneumatic |
Instructions for safe operation and operator responsibility.
Pre-operation checks, fuel handling, and inspection.
Guidelines for safe machine operation on slopes and in general.
Rules for maintaining and storing the machine safely.
Step-by-step instructions for installing the handle assembly.
Instructions for connecting the shift rod to the indicator.
Instructions for connecting the clutch cable to the control bar.
Recommendation for adjusting tire pressure for optimal performance.
Procedure for checking the engine oil level.
Instructions for filling the fuel tank.
Step-by-step procedure for starting the engine.
How to operate the tines for tilling.
Important safety steps before performing maintenance.
General guidance for engine maintenance tasks.
Instructions for lubricating the transmission.
Guidelines for storing the tiller safely and properly.
How to adjust the handle height for optimal comfort and use.
Steps to adjust the tension of the ground drive belt.
Step-by-step guide for replacing the drive belt.
How to replace worn or damaged tines.
Diagnosing and resolving engine starting problems.
Troubleshooting causes for poor engine performance.
Key technical specifications and data for the CRT81 model.
