Husqvarna CTH 174 User Manual

Euro
532 44 78-18
CTH 174
Instruction manual
Please read these in struc tions care ful ly
and make sure you un der stand them before
using this ma chine.
Manuel d’instructions
Merci de lire trés attentivement le manuel
d'instructions. Assurez-vous d'avoir tout
compris avant d'utiliser ce tracteur.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en zorg
dat u ze begrijpt voordat u deze ma chine
gebruikt.
Manual de las instrucciones
Por favor lea cuidadosamente y comp-
renda estas intrucciones an tes de usar
esta maquina.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorgfältig
durch und vergewissern Sie sich, daß Sie
diese verstehen, bevor Sie die Maschine
in Betrieb nehmen.

Husqvarna CTH 174 Specifications

General

Manufacturer	Husqvarna
Model	CTH 174
Transmission	Hydrostatic
Drive System	Rear-wheel drive
Engine	Briggs & Stratton
Engine Type	4-stroke

Summary

1. Safety Rules

I. TRAINING

Understand controls and proper use for safe operation.

II. PREPARATION

Inspect and prepare the machine and area before use.

III. OPERATION

Guidelines for safe and effective use of the ride-on mower.

IV. MAINTENANCE AND STORAGE

4. Before starting.

Filling up

Critical procedures and warnings for refueling the tractor safely.

Oil level

5. Driving.

Starting of Motor

Step-by-step guide on safely starting the tractor engine.

PURGE TRANSMISSION

To Move Forward and Backward

Cutting

Reverse Operation System (ROS)

Explanation of the safety system that prevents reverse mowing with attachments engaged.

6. Maintenance, Adjustment.

WARNING! Before servicing...

Essential safety precautions before performing any maintenance or inspection.

Fluid Maintenance

Blade Maintenance

To Replace Mower Drive Belt

7. Troubleshooting.

Engine Will Not Start

Common causes and checks for an engine that fails to start.

Engine Performance Issues

Reasons for rough engine operation, loss of power, or overheating.

Starting System Problems

Cutting and Vibration Issues