Husqvarna CT130 User Manual

1
Instruction manual
Please read these instructions carefully
and make sure you understand them
before using this machine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorgfältig
durch und vergewissern Sie sich, daß
Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le
manuel d'instructions. Assurez-vous
d'avior tout compris avant d'utiliser
ce tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y
comprenda estas intrucciones antes
de usar esta maquina.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed
accertatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
machine gebruikt.
CT130

Husqvarna CT130 Specifications

General

Engine Manufacturer	Briggs & Stratton
Cutting Width	30 inches
Cutting Height, min	1.5 inches
Cutting Height, max	4 inches
Deck Material	Steel
Mulching Capability	Yes
Engine Type	Single-cylinder, 4-stroke
Fuel Type	Gasoline
Fuel Capacity	0.95 liters
Fuel Tank Capacity	0.95 liters

Summary

Safety Rules

Operator Training

Familiarize with controls, understand safe operation, and reasons for loss of control.

Preparation Procedures

Inspect area, handle fuel safely, wear proper attire before mowing.

Safe Operation Practices

Guidelines for safe mowing, including slope use and hazard avoidance.

Maintenance and Storage Guidelines

Assembly Instructions

Battery Installation

Driving and Operation

Tractor Controls

Operation of brake, gear shift, ignition, and parking brake controls.

Cutting Unit Operation

Before Driving Checks

Engine Starting Procedures

Step-by-step instructions for starting the engine, including choke and ignition use.

Maintenance and Adjustments

Engine Servicing Procedures

Blade Maintenance and Removal

Troubleshooting

Engine Problems

Diagnosing and resolving issues like engine not starting, rough running, or overheating.

Electrical and Battery Issues

Mechanical and Cutting Issues