To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna CT131 and is the answer not in the manual?
General| Brand | Husqvarna |
|---|---|
| Model | CT131 |
| Category | Lawn Mower |
| Language | English |
Essential training and familiarization with controls for safe operation.
Steps to prepare the tractor and area before use, including fuel handling.
Safe operating practices for the ride-on mower, including slope and load handling.
Guidelines for maintaining the tractor and proper storage procedures.
Instructions for assembling the steering wheel and related components.
Details for assembling the extension shaft for the steering.
Instructions for installing and adjusting the tractor seat.
Steps for correctly installing the tractor battery.
Safety warning about removing metal items before installing the battery.
Instructions for installing bagger components onto the tractor.
How to adjust the bagger assembly for proper fit and appearance.
Steps to assemble and install the mulcher plug onto the handle.
Procedure to adjust gauge wheels for optimal cutting height and deck positioning.
Identifies and explains the location and function of various tractor controls.
Description of the tractor's light switch function.
Explanation of the throttle control for regulating engine speed and blade rotation.
Explanation of the dual-function brake and clutch pedal.
Description of the gear box positions and how to change gears.
How to engage and disengage the cutting unit drive.
Procedure for quickly raising and lowering the cutting unit.
Explanation of the three ignition key positions for starting and operating the engine.
Instructions on how to engage and disengage the parking brake.
How to adjust the mower's cutting height using the adjustment wheel.
Instructions for using the choke control for cold starts.
Instructions for safely filling the fuel tank with unleaded petrol.
How to check and maintain the correct engine oil level.
Recommended tire pressure for optimal tractor performance.
Steps to safely start the tractor's engine.
Procedure for operating the clutch/brake pedal and gear shift.
How to use the choke for cold engine starts.
Instructions for turning the ignition key to start the engine.
Explanation of the Reverse Operation System and its safety features.
Safety warning against mowing in reverse unless necessary.
Advice for achieving optimal cutting results and lawn appearance.
Instructions for emptying the grass bagger and disabling the alarm.
Instructions for converting the mower for mulching or rear discharge.
Precautions when operating the tractor on slopes to prevent tipping.
Explanation of operator presence and ROS safety systems.
Testing the operator presence system to ensure it functions correctly.
Testing the ROS system for proper operation, especially with attachments engaged.
Importance of sharp blades and how to replace damaged ones.
Step-by-step guide for removing the mower blades.
Important instructions for proper blade installation and handling.
Details for the 5-star pattern blade and its installation.
Details for the 6-star pattern blade and its installation.
Procedure to check the tractor's brake performance.
Step-by-step instructions for removing the cutting unit from the tractor.
Procedure for installing the cutting unit back onto the tractor.
Instructions for removing and installing the drive belt for the cutting unit.
Identification of the gear shift lever and neutral lock gate.
Procedure for adjusting the transaxle to ensure neutral position.
Common causes and solutions for engine starting problems.
Troubleshooting steps when the starter motor does not engage the engine.
Diagnosing and fixing issues causing uneven engine operation.
Troubleshooting steps for uneven cutting performance.
Steps to follow for proper storage of the tractor at the end of the mowing season.
Information required when ordering spare parts or requesting service.
