To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna Cut-n-Break K 760 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Engine Power | 3.7 kW |
| Displacement | 73.5 cm³ |
| Max Cutting Depth | 400 mm |
| Fuel Tank Capacity | 0.9 L |
| Sound Pressure Level | 101 dB(A) |
Explains various symbols used on the machine for safety and identification.
Details the different warning levels (Warning, Caution, Notice) and their significance.
A welcoming message from the manufacturer to the customer.
Highlights key performance features and technological advancements of the product.
Identifies and labels all parts of the K 760 and K 760 Rescue power cutters.
General safety advice regarding machine equipment and checks for safe operation.
Explains the function and checking procedure for the throttle lock and stop switch.
Details the importance of the blade guard and how to check it for damage.
Explains the vibration damping system and muffler inspection requirements.
Overview of cutting blades, their types, and general usage precautions.
Specific safety and usage guidelines for cutting blades on high-speed machines.
Explains causes of blade vibration, how to test abrasive blades for damage.
Details diamond blades, warnings against toothed blades, and storage.
General safety precautions before starting assembly or adjustments.
Instructions for inspecting drive shaft and flange washers for damage or wear.
Step-by-step guide for mounting the blade, using bushings, and adjusting the guard.
Procedure to deactivate the OilGuard system if specific oil is unavailable.
Safety warnings related to fuel handling, fumes, and ventilation.
Guidance on selecting and using the correct gasoline and two-stroke oil.
Detailed instructions on how to properly mix fuel and oil, including ratios.
Refueling safety, storage guidelines, and OilGuard system operation.
Lists essential personal protective equipment (PPE) required for safe operation.
Basic safety principles, manual reading, operator responsibility, and common sense usage.
Safety measures for the work area and fundamental operating techniques.
Explains kickback, how to avoid it, and transport/storage tips.
Pre-start checks including manual review, PPE, area safety, and fuel check.
Step-by-step instructions for starting the power cutter, including decompression, choke, and starter cord usage.
Instructions on how to safely stop the engine using the stop switch.
General warnings and guidelines for performing maintenance tasks and the maintenance schedule.
Instructions for cleaning the machine and its cooling air intake.
Guidance on checking and maintaining the spark plug and drive belt tension.
Steps for replacing drive belt and adjusting carburetor idle speed.
Procedures for changing starter cord, tensioning recoil spring, and replacing recoil spring.
Guide to fitting starter, fuel system checks, and air filter replacement.
Guidance on checking the drive gear and clutch for signs of wear.
Specifications related to the motor, ignition system, and spark plug.
Information on carburetor type, fuel capacity, and machine weight.
Technical data for cutting blades, including peripheral speed and output shaft speed.
Outlines owner's rights/duties, coverage, commencement date, and what is covered/not covered.
Details on filing claims, locations for service, and parts list for warranty.
Reinforces owner's responsibility for required maintenance and addresses add-on parts.
