Why does my Husqvarna Vacuum Cleaner motor stop immediately?
- Kkelly73Aug 13, 2025
The Husqvarna Vacuum Cleaner motor might stop immediately after starting, or not start at all, due to several reasons. It could be due to a lack of power; in this case, connect the product to a power supply. A defective power cord, a short circuit, or a broken or disconnected fan could also be the cause; for these issues, it's recommended to let an approved service agent repair the product. Also, check if the HEPA filter is damaged or not installed (DE 110/DE 120) and replace or install it if necessary. Ensure the correct power supply is used to avoid too high voltage and that the ambient temperature is within the specified range.