To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna DUAL PURPOSE TE 610 I.E and is the answer not in the manual?
Read manual carefully and pay special attention to statements preceeded by specific words.
Use only Husqvarna ORIGINAL parts when replacing parts.
Details about ignition switch positions, warning lights, and the digital instrument display.
Essential checks to perform before riding the motorcycle for safety and operation.
Step-by-step guide for starting the engine, including cold start procedures.
Overview of maintenance operations scheduled at different intervals.
Procedure to check the engine oil level using the inspection window.
Steps for draining old oil and replacing the oil filter cartridge.
Procedure for checking and adjusting the drive chain tension and lubrication.
How to adjust the front brake lever position for rider comfort.
General| Engine Type | Single cylinder, 4-stroke |
|---|---|
| Transmission | 6-speed |
| Cooling | Liquid-cooled |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Starter | Electric |
| Final Drive | Chain |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Displacement | 576 cc |
| Fuel System | Fuel injection |
| Fuel Tank Capacity | 12 liters |
| Rear Suspension | Sachs shock absorber |
| Torque | 49 Nm (36 lb-ft) @ 5, 500 rpm |
| Front Suspension | Marzocchi "Upside-Down" telescopic hydraulic fork with advanced axle (ø 45 mm) |
