OPERATION
Husqvarna-25
UP
BLADES ON
DOWN
BLADES OFF
CHOKE
FAST
SLOW
Before Starting
• Read the sections Safety Instructions and Controls
before starting the machine.
• Perform the daily maintenance before starting
(see Maintenance Schedule in the Maintenance
section).
• Check that there is suffi cient fuel in the fuel tank.
• Adjust the seat to the desired position.
The following conditions must be fulfi lled before the
engine can be started:
• The blade switch for engaging the mower blades
must be depressed.
• The parking brake must be on.
• Both steering controls must be in the locked
(outer) neutral position.
Starting the Engine
• Sit on the seat.
• Raise the mower deck by pushing the release
button on the top of the lifting lever. Pull the lifting
lever backward to the locked position (transport)
position.
• Activate the parking brake by pushing the release
button in and pulling the lever fully upwards.
Disengage the mower blades by pressing the blade
switch downwards.
8058-019
Mower deck lifting lever
8058-020
Pull parking brake upwards to activate.
8052-001
Blade switch
To Next Page
Loading...
