OPERATION
Husqvarna-29
Running
1. Release the parking brake by pushing the button
and moving the lever downward.
NOTE: The mower is equipped with an operator
presence system. When the engine is running, any
attempt by the operator to leave the seat without
fi rst setting the parking brake will shut off the
engine.
2. Move the steering controls to the neutral position
(N).
3. Set retaining pin into selected cutting height and
secure the opposite side with a cotter hairpin.
4. Push the release button on the cutting height lever
and move lever to the pin, release the button.
5. Set the cutting height with the cutting height
adjustment lever.
8058-019
Mower deck lifting lever
WARNING!
Ensure that no one is near mower
when engaging blade switch.
Make sure the work area is free from
objects that could be thrown by the
rotating blades.
8058-02s0
Parking brake released
8058-024
Secure selected cutting height
To Next Page
Loading...
