What to do if Husqvarna Lawn Mower is upside down?
If the Husqvarna Lawn Mower is 'Upside down', it means it is leaning too much or has turned over. Turn the mower the right way up and fix the cause of it turning over.
Why does my Husqvarna Lawn Mower say guide not found?
If your Husqvarna Lawn Mower displays 'Guide not found', the mower is no longer receiving signals from the guide wire. Check the guide wire connection to the charging station. There may be a break in the guide wire. If the mower was used on another installation with different guide wires, this message can appear.
What to do if Husqvarna Lawn Mower is having difficult finding home?
If your Husqvarna Lawn Mower says 'Difficult finding home', the mower followed the boundary wire but didn't find the charging station. Check the boundary wire's corridor width setting and location.
What does 'Alarm! Mower switched off' mean on my Husqvarna Lawn Mower?
If your Husqvarna Lawn Mower displays 'Alarm! Mower switched off', the alarm was activated because the mower was switched OFF. Adjust the mower security level in the Security menu.
What does 'Alarm! Mower stopped' mean on my Husqvarna GARDENA SILENO R100LiC Lawn Mower?
If your Husqvarna Lawn Mower displays 'Alarm! Mower stopped', the alarm was activated because the mower was stopped. Adjust the mower security level in the Security menu.
What does 'Alarm! Mower lifted' mean on my Husqvarna Lawn Mower?
If your Husqvarna Lawn Mower displays 'Alarm! Mower lifted', the alarm was activated because the mower was lifted. Adjust the mower security level in the Security menu.
General| Brand | Husqvarna |
|---|---|
| Model | GARDENA SILENO R100LiC |
| Category | Lawn Mower |
| Language | English |
Lists technical specifications for Automower® 310 and 315 models.
Lists technical specifications for GARDENA R100Li/R100LIC and R130Li/R130LiC and R160Li.
Provides information on the Li-Ion battery and its charging.
Provides guidelines for optimal placement of the charging station.
Explains the requirement for a charging station and boundary loop.
Instructions for installing the guide wire.
Introduces the Autocheck EXP service program and its uses.
Explains how to connect the mower to the computer for service.
Describes the user interface and main functions of Autocheck EXP.
Explains the comprehensive Auto Test and Manual Test functions.
Covers software updates, log book use, and service modes.
General guidelines and safety precautions for performing repairs.
Step-by-step guide to removing and reattaching the mower's body.
Instructions for separating and joining the mower's chassis halves.
Step-by-step guide to disassembling and reassembling the charging station.
Initial steps: update software, reset settings, check basic causes.
Lists error messages, causes, and recommended actions.
Categorizes symptoms by situation (mowing, searching, docking, charging).
Provides guidance on troubleshooting loop signal issues using charging station LED.
Methods for locating breaks in the boundary loop wire.
Explains why and how to perform a battery test and evaluate results.
To Next Page